7,633 Pages

MSZ-007 Mass Production Type Ζ Gundam

Unit Type

Prototype Mobile Suit


Model Number
  • MSZ-007
Developed from
First Seen

General Characteristics

Head Height
  • 20.4 meters
    66.929 ft
    803.15 in
Max Weight
  • 48.3 metric tons
Standard Weight
  • 30.9 metric tons
Power Output
  • 1830 kW
    2,454.07 hp
Sensor Range
  • 11900 meters
    39,041.995 ft
  • Gundarium alloy


Max Acceleration
  • 1.53 G
  • Rocket Thrusters: 73900 kg total
    • 1 x Mega Beam Rifle

The Mass Production Type Ζ Gundam is a Mobile Suit Variation from the series Mobile Suit Zeta Gundam.

Technology & Combat Characteristics

Consider a scale-down version of the MSZ-006 Zeta Gundam, the Mass Production Type Ζ Gundam lacks the transformable ablity, instead Wing Binders similar to the MSN-00100 Hyaku Shiki was installed.It also replaced the Gundam head with one similar to the MSA-003 Nemo. Its armaments is simple, consists of head-mounted vulcan gun, a mega beam rifle, a pair of beam sabers which can be stored in recharge racks on the hip armor of the suit.


  • Vulcan Guns
A standard armament of the mobile suits in this era. These head mounted shell firing weapons have a high-rate of fire, but have little power and are generally ineffective against mobile suits; however, the vulcan gun can damage lightly armored areas such as the sensors. These weapons are ideal for shooting down small, fast moving, lightly armored targets such as missiles or small vehicles.
  • Mega Beam Rifle
Unlike normal Suits, the Mass Production Type Ζ Gundam is equipped with a more powerful Mega Beam Gun. The power of this weapon's beam can destroy a mobile suit with on hit, or even a standard mobile suit shield with constant firing. But its consummate in energy made this weapon, powered be a replaceable E-Pac, can not firing rapidly.
  • Beam Saber
The standard close range armament for most Mobile Suits. The beam saber is a small cylindrical device held in the mobile suit's hands when operated and is powered by an energy capacitor that is recharged from special racks. The beam saber is capable of cutting through any metal that has not been treated with anti-beam coating. The Mass Production Type Ζ Gundam is equipped with two beam sabers stored in recharge rack on the hips.


After the high performance of the MSZ-006 Zeta Gundam became evident, Anaheim Electronics planned to mass produce the suit. Using data from Zeta Gundam and MSZ-007 Z Rapier I, they created the Mass Production Type Ζ Gundam, which removed the transformation and replaced the head with one similar to the MSA-003 Nemo. However, this design turned out to be inferior to their other project, the MSR-00100 Hyaku Shiki Kai and its development was halted upon mass production. Still, the Ζ Gundam became the basis for the design of later mass-production mobile suits such as the Earth Federation's Ζeta Plus mobile suit series and Londo Bell's RGZ-91 Re-GZ.

External Links

Mass Production Type Ζ Gundam on MAHQ

Template:Early Universal Century Mobile weapons

Community content is available under CC-BY-SA unless otherwise noted.