FANDOM

7,631 Pages

m
(7 intermediate revisions by 3 users not shown)
Line 3: Line 3:
 
|transformable=No
 
|transformable=No
 
|production=Prototype
 
|production=Prototype
|specialized=General Purpose
 
 
|usage=Assault
 
|usage=Assault
 
|type=Suit
 
|type=Suit
Line 14: Line 13:
 
|manufacturer=Anaheim Electronics,
 
|manufacturer=Anaheim Electronics,
 
|powerplant=Minovsky Ultracompact Fusion Reactor
 
|powerplant=Minovsky Ultracompact Fusion Reactor
|paccommodation=Pilot only (in cockpit in torso)
+
|paccommodation=Pilot only~in cockpit in torso
 
|armaments=4 x 110mm Machine Cannon
 
|armaments=4 x 110mm Machine Cannon
 
2 x Beam Saber
 
2 x Beam Saber
 
|OptionalEquip=X-04 Beam Machine Gun
 
|OptionalEquip=X-04 Beam Machine Gun
}}The '''AGX-04A1 Gerbera Tetra Kai''' ("''Kai''" is the Japanese Kanji character "改", In English translates into "''Modified''") is a variant of [[AGX-04 Gerbera Tetra]] designed by Mika Akitaka. It's first illustration appeared in Bandai Visual's [[Mobile Suit Gundam 0083: Stardust Memory]] laser disc and later made appearance in Hobby Japan's ''GUNDAM WEAPONS 3'' as well as [[Gihren's Greed]] video game. Katoki Hajime later re-design it as part of [[Gundam Fix Figuration]] in 9/2002.
+
}}The '''AGX-04A1 Gerbera Tetra Kai''' ("''Kai''" is the Japanese Kanji character "改", In English translates into "''Modified''") is a variant of [[AGX-04 Gerbera Tetra]] designed by Mika Akitaka. It first appeared in Bandai Visual's [[Mobile Suit Gundam 0083: Stardust Memory]] laser disc and later appeared in Hobby Japan's ''GUNDAM WEAPONS 3'' as well as [[Gihren's Greed]] video game. Katoki Hajime later re-design it as part of [[Gundam Fix Figuration]] in 9/2002.
   
 
==Technology & Combat Characteristics==
 
==Technology & Combat Characteristics==
The AGX-04A1 Gerbera Tetra Kai is a unit with less modified parts from the [[RX-78GP04G Gundam "Gerbera"]] and would be able to maintain more of the original specifications of the RX-78GP04G.
+
The AGX-04A1 Gerbera Tetra Kai is a unit with less modified parts from the [[RX-78GP04G Gundam "Gerbera"]] and would be able to maintain more of the specifications of the RX-78GP04G.
   
 
==Armaments==
 
==Armaments==
 
;*110mm Machine Cannon
 
;*110mm Machine Cannon
:The Gerbera Tetra Kai is equipped with four 110mm machine cannons, two mounted on each forearm. Having the greatest rate of fire of all the Gerbera Tetra Kai's weapons these are primarily used to ward off advancing enemies, shoot down missiles, or hit other fast moving targets. They also made good use as anti-aircraft and anti-personnel weapons.
+
:The Gerbera Tetra Kai is equipped with four 110mm machine cannons, two mounted on each forearm, with the magazines attached to the elbows. They are much stronger than the 60mm vulcan guns mounted in the head of the Gundam and GM-type mobile suits, and combined with their excellent rate of fire, they are extremely effective in mid-close range mobile suit combat.
   
 
;*Beam Saber
 
;*Beam Saber
:The beam saber is a small cylindrical device held in the mobile suit's hands when deployed and is powered by a rechargeable energy capacitor. It emits high-energy Minovsky particles to form a blade-shaped I-field (via manipulation of electromagnetic fields), and then fills this I-field shell with superheated Minovsky particle plasma to produce an effective cutting blade. The beam saber is capable of cutting through any metal that has not been treated with anti-beam coating.
+
:The beam saber is a small device held in the mobile suit's hands when deployed and is powered by a rechargeable energy capacitor. It emits high-energy Minovsky particles to form a blade-shaped I-field (via manipulation of electromagnetic fields), and then fills this I-field shell with superheated Minovsky particle plasma to produce an effective cutting blade. The Gerbera Tetra Kai has two beam sabers stored in unknown location.
   
 
;*X-04 Beam Machine Gun
 
;*X-04 Beam Machine Gun
:The beam machine gun operates on similar principles as a beam rifle, but it breaks down the concentrated mega particles so that it fired a burst of smaller less powerful beams instead of a single large coherent beam. Each individual beam in a burst was less powerful than the coherent beam from most other beam rifles, however because of the immense power in standard beams this was an issue of little importance. The burst did allow for a spread of beams, similar to a beam spray gun, allowing for a greater chance of hitting a target, yet holds the same range as a regular beam rifle. Because the beam machine gun will overheat from constant use, it was equipped with an automatic cooling mechanism.
+
:A prototype beam weapon that continuously fires pulse shaped beams and excels in sweeping fire and assault use, causing widespread destruction by multiple shots. As the technology for intermittently firing mega particles is under development, a cooling jacket and a coolant tank is connected to the barrel and the lower part of the barrel respectively. A forced cooling nozzle is also located at the back of the generator section. When the gun has reached its operating limit, the top part of the generator section slides out for forced cooling and a limiter is also activated, disabling the rapid-fire mode. Reactivation of the mode requires a new coolant tank.
   
 
==History==
 
==History==
Line 40: Line 39:
 
Gerbera-tetra-kai-girl.jpg|Gerbera Tetra Kai [[MS Girl]]
 
Gerbera-tetra-kai-girl.jpg|Gerbera Tetra Kai [[MS Girl]]
 
Gerbera Tetra Kai.jpeg
 
Gerbera Tetra Kai.jpeg
gerberatetrakai.png|Gerbera Tetra Kai/Cima as they appear in SD Gundam G Generation Overworld
+
gerberatetrakai.png|With Cima in SD Gundam G Generation Overworld
Gerbera Tetra Kai.jpg|Gerbera Tetra Kai as featured in Gundam War card game
+
Gerbera Tetra Kai.jpg|As featured in Gundam War card game
 
04A1.jpg
 
04A1.jpg
 
gbkaiggfur.jpg
 
gbkaiggfur.jpg
 
SD Gundam G Generation Genesis Gerbera Tetra Kai.jpg|As seen on [[SD Gundam G Generation Genesis]] for Nintendo Switch game
 
SD Gundam G Generation Genesis Gerbera Tetra Kai.jpg|As seen on [[SD Gundam G Generation Genesis]] for Nintendo Switch game
  +
Super Gundam Royale Gerbera Tetra Kai.png|As seen on [[Super Gundam Royale]] game
 
</gallery>
 
</gallery>
   

Revision as of 02:34, January 18, 2020

The AGX-04A1 Gerbera Tetra Kai ("Kai" is the Japanese Kanji character "改", In English translates into "Modified") is a variant of AGX-04 Gerbera Tetra designed by Mika Akitaka. It first appeared in Bandai Visual's Mobile Suit Gundam 0083: Stardust Memory laser disc and later appeared in Hobby Japan's GUNDAM WEAPONS 3 as well as Gihren's Greed video game. Katoki Hajime later re-design it as part of Gundam Fix Figuration in 9/2002.

Technology & Combat Characteristics

The AGX-04A1 Gerbera Tetra Kai is a unit with less modified parts from the RX-78GP04G Gundam "Gerbera" and would be able to maintain more of the specifications of the RX-78GP04G.

Armaments

  • 110mm Machine Cannon
The Gerbera Tetra Kai is equipped with four 110mm machine cannons, two mounted on each forearm, with the magazines attached to the elbows. They are much stronger than the 60mm vulcan guns mounted in the head of the Gundam and GM-type mobile suits, and combined with their excellent rate of fire, they are extremely effective in mid-close range mobile suit combat.
  • Beam Saber
The beam saber is a small device held in the mobile suit's hands when deployed and is powered by a rechargeable energy capacitor. It emits high-energy Minovsky particles to form a blade-shaped I-field (via manipulation of electromagnetic fields), and then fills this I-field shell with superheated Minovsky particle plasma to produce an effective cutting blade. The Gerbera Tetra Kai has two beam sabers stored in unknown location.
  • X-04 Beam Machine Gun
A prototype beam weapon that continuously fires pulse shaped beams and excels in sweeping fire and assault use, causing widespread destruction by multiple shots. As the technology for intermittently firing mega particles is under development, a cooling jacket and a coolant tank is connected to the barrel and the lower part of the barrel respectively. A forced cooling nozzle is also located at the back of the generator section. When the gun has reached its operating limit, the top part of the generator section slides out for forced cooling and a limiter is also activated, disabling the rapid-fire mode. Reactivation of the mode requires a new coolant tank.

History

Gallery

Action Figures

Notes & Trivia

Reference

External links

Community content is available under CC-BY-SA unless otherwise noted.